with interchangeable sterilised injection tips
For local anaesthetics, therapeutic applications in Dermatology, Rheumatology and Mesotherapy
The DERMOJET Polymedical :
Single Dose of 0.1 ml.
This manually operated instrument is of
cylindrical shape and
comprises 3 parts :
- The body of the syringe containing a piston, a tension spring,
and an arming lever
- A 4 ml Pyrex reservoir
- An injection head fitted with an adaptator for the "Tip
Jet" head
Operation:
- introduction of the injection fluid into the reservoir,
- loading of the injector by movement of the lever,
- delivery of the fluid by pressure on the trigger.
Weight: approximately 250 gm.
The "Automatic" Dermojet Polymedical :
With single dose of 0.1 ml.
This injector is in the shape of an
automatic pistol and
comprises 4 parts:
- the body of the syringe with integral piston and tension-spring,
- an assembly of two removable hand-grips and a trigger,
- an adjustable support to carry either sealed flasks of fluid or
a 10 ml. reservoir,
- an injection-head fitted with an adaptor for the "Tip
Jet” attachment.
Operation:
- Loading and operation of the unit is carried out in one
movement by simply depressing the trigger, Jet-pressure is
determined by rotation of the thumb-screw fitted on the rear of
the instrument.
- The AUTOMATIC allows injections to made at a high rate, without
the need to decant the injection-fluid: its use is specially
recommended in situations concerning MESOTHERAPY an
Group-vaccinations.
Weight: approximately 700 gm.
These injection units are completly self-contained. High pressure and quiet in operation, they are manufactured from stainless steel; Their design facilitates intensive, fatigue-free use.
THE TIP-JET INTERCHANGEABLE AND
STERILISED INJECTION HEADS
(registered Trade Mark and Name) for the DERMO
JET POLYMEDICAL Needle-Free,
High Pressure, Injectors <AKRA Patent>
These heads are readily adaptable to
all models of the
DERMO JET POLYMEDICAL injectors, Refs. 500, 510 and 520.
Manufactured from high quality Stainless Steel, their major
advantage is that they are readily removed from the body of the
injector for sterilisation after each application. Replacement of
the removed head is carried out in a matter of seconds through
the use of a quick-release fixing system.
The Mono-Jet Heads :
Ref 580 : Single Dose Head of 0.1 ml
Ref 581 : Single Dose Head of 0.1 ml fitted with a moveable tip (Ref
161)
The Simultaneous Multi-Jet Heads :
These heads allow the injection of
micro-doses varying from 0.033
ml. to 0.02 ml. by MULTI-JETS of 3 to 5 orifices (MESOTHERAPY).
Ref 594 : 3 Doses Head of 0.033 ml.
Ref 596 : 5 Doses Head of 0.02 ml.
IMPERATIVE: Sterilisation according to current standards at 134° Celsius with autoclave for 18 minutes.